@  

 

 

 

 

REIDS ROD PARTS inc ® & related Logo's are registered trademarks of REIDS ROD PARTS Inc.
Copyright © 2009. All Rights Reserved

 

 

FRONT END KIT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CLICK TO VIEW

 

 

REIDS ROD PARTS inc ® & related Logo's are registered trademarks of REIDS ROD PARTS Inc.
Copyright © 2008. All Rights Reserved

   

 

 

BRAKE SYSTEMS

1932 Ford Roadster - Wheel Interior

SO-CAL Speed Shop Hot Rod Front Brake kit

Adding to the long list of our 'New Traditionalist' product line is the Hot Rod Brake system. Concealing a disc brake inside a cosmetic aluminum drum cover is nothing ADDITIONAL SHIPPING COST WILL APPLYnew to the industry but the superior construction of this assembly is what puts it in a class by itself. This superior product is detailed to the max. Check out the features listed below and you will see why we are so excited about this remarkable new addition to the SO-CAL Speed Shops unique line of hot rod products and services.

 

PART DISC. PRICE  
CALL UNPOLISHED KIT $1,795.00 To order please E-mail, Call or Fax
SOC-62031 POLISHED KIT $1,975.00 To order please E-mail, Call or Fax

 

-Die cast aluminum alloy drum covers. Casting flaws such as pin holes and voids are a thing of the past.
-The backing plate is constructed of pre-polished deep drawn stamped stainless steel. Here again, a flawless finish prevails.
-Air inlet scoops are heat treated investment cast stainless steel, again showing no casting flaws.
-The Hot Rod Brake system uses dual piston aluminum calipers and our own vented cast iron rotors.
-The entire assembly rides on a New Traditionalist CNC machined aluminum hub that includes the highest quality bearings and seals on the market.
-Hot Rod Brakes are available in 5 on 41/2" , 43/4" and 51/2" bolt circles and fit 37-41 Ford round (not square) style spindles.
-Rear drum covers are also available and designed to fit over 11" Ford drums.
-Hot Rod Brakes are available with plain or polished drums and scoops. The system is sold exclusively through your local SO-CAL Speed Shop or SO-CAL Speed Shop authorized dealer.

 

BUICK FAKE BRAKE DRUM COVER FOR THE REAR.

Now that you got the So-Cal brake set for your front, you need something for that rear end. This is a Faux cover that allows you to match the front set. This is a cover only. These die cast aluminum covers are designed to fit over a 9" Ford rear drum. They index off the 2.8" rear drum register and come with a unilug pattern for 5 on 4 1/2", 4 3/4", 5" and 5 1/2". Available in plain or Polished.

PART DISC. PRICE  
CALL UNPOLISHED $375.00 Please Call To order
SOC-62107 POLISHED $575.00 Please Call To order

 

 

FRONT FINNED DRUMADDITIONAL SHIPPING COST WILL APPLY BRAKE SET

 

This set includes backing plate and springs wheel cylinders pads. Does not include the drums. Available in 60's Buick or early Ford drum sizes.

 

 

PART DISC. PRICE  
3339 DRUM BRAKE SET $490.00 To order please E-mail, Call or Fax

 

 

Power Stopper Front Brake Kits

ADDITIONAL SHIPPING COST WILL APPLY

 

- Designed for 3000lb. and over Ford passenger cars
- Fits 1937-48 Ford cars and 1948-56 Ford Trucks
- Cast iron hubs, 1" vented rotors
- Comes with stamped steel dust cover
- bolt patterns include...

  • 4-1/2", 1" rotor
  • 4-3/4", 1" rotor
  • 5", 1" rotor
  • 5-1/2, 1" rotor
PART DISC. PRICE  
  CALL, FAX OR EMAIL FOR INFO AND APPLICATION TYPE

STARTING AT $900.00

 

To order please E-mail, Call or Fax

 

MAGNUM ECONO DISC BRAKE KIT FOR 37-48 FORD SPINDLES

ADDITIONAL SHIPPING COST WILL APPLY

Recommended for vehicles 3,000 lbs and up.

"Magnum Axle's Econo Front Disc Brake Kits" have been designed to adapt 1977 and earlier GM hubs and rotor assemblies to 1937-48 Ford spindles without spindle modifacation or special steering arms. Kits are designed to accept 78-up GM intermidiate calipers and include bearing adapters, caliper mounting brackets, bearings, seals, hardware and instructions.

 

PART DISC. PRICE  
  CALL, FAX OR EMAIL FOR INFO AND APPLICATION TYPE $350.00 To order please E-mail, Call or Fax

 

FINNED BACKING PLATES

Super Bell's Finned Aluminum Backing Plates act as a rotor shield, caliper bracket, and air scoop for cooling the rotors. These plates have been designed to work with the Super Stopper 3/8" and 1" rotor kits (using the 4-piston Wilwood caliper) but will cross over to similar kits with modifications. (Modifications void the warranty)

 

PART DISC. PRICE  
P&J 1130p FULL POLISH FINNED BACKING PLATES $390.00

 

 

1939 LINCOLN STYLE BRAKES

These stamped steel '39 Lincoln-style brakes are full-contact, self-energizing 12-inch Bendix-style brakes that fit 1928-'48 early Fords. This is a complete, bolt-on conversion that uses your '37 to '48 hubs and drums. Kit includes steel reproduction braking plates, new wheel cylinders, new brake shoes and springs and all hardware.

 

PART DISC. PRICE  
WWE LBFT LINCOLN BACK PLATE SET $460.00pr To order please CALL IN

 

 

 

Part Disc. Price  
WIL 260-8419 PROPORTIONING VALVE $48.00

 

 

 

 

Part Disc. Price  
WIL 260-3278 BLUE 2 PSI -DRUM $20.00
WIL 260-1876 RED 10 PSI - DISC $20.00

 

 

CLICK TO ENLARGE
Thru-Frame S/S Brake Fitting  
<--- CLICK TO SEE A LARGER PICTURE OF THESE ITEMS - Polished. Sold in Pairs
SKU Part Price ADD TO CART
AHR 3240B Thru-Frame S/S Brake Fitting $35.00pr

 


Detailed Description
Designed with a smooth mushroom shaped head, made to accept 1/8" NPT fittings. They come with a threaded end, and are milled for tightening with a 1/2" wrench. Available fro frame widths up to 2-1/4".

 

BRAKE SCOOPS

 

Part Disc Price  
GRA 6105P BRAKE SCOOPS 39-48 FORD BRAKE BLACKING PLATES $75.00pr

 

3/16 STAINLESS STEEL BRAKE LINE

 

Part Disc. Price  
RRP 2207 10 ft. length $29.95

 

S/S FLEX BRAKE LINES

 

 

Part Disc. Price  
MAG 4783 BRAKE HOSE KIT - S/S MUSTANG II FRONT $62.00pr
MAG 4778 BRAKE HOSE KIT - GM DISC 78-UP GM FRONT $62.00pr
MAG 4786 BRAKE HOSE KIT- FORD REAR DRUM $62.00pr

BRAKE BOOSTER

 

Part Disc. Price  
INT IW3035MCPB7 Brake Booster 7" RAW (single) $80.00
MBM PB7001C Brake Booster 7" CHROME (SINGLE) $99.00
MBM PB7001SS Brake Booster 7" S/S (SINGLE) $145.00
MBM PB7537 Brake Booster 7" RAW(Duel) $90.00

VETTE MASTER CYLINDER

This item features fittings of both sided of the unit for passenger or driver side mounting. This kit includes 2 plugs to cork the side you do not use. Great for Non-US application or also mounting under the dash.

 

Part Disc. Price  
MBM MC1321H VETT DUEL MASTER CYLINDER $62.00
MBM MC1312C VETT DUEL MASTER CYLINDER CHROME $105.00
MBM MC1321ACH VETT DUEL MASTER CYLINDER ALUM/CHROME $85.00

STAINLESS STEEL HOLD DOWN CLAMPS

Made of Heavy Gauge Stainless Steel. Each package includes stainless steel 10/32 button head allen screws and stainless steel Phillip head sheet metal screws, added at no extra cost. Some of the fallowing items may be special order.

(CLICK HERE TO VIEW THE SELECTION)

CLICK IMAGE TO VIEW SELECTION

Available in Single and Double in these sizes: 7/8”, 3/4”, 5/8”, 1/2”, 3/8”, 5/16”, 1/4”, & 3/16”.
Also in Combo Doubles: 5/16 x 3/8 & 3/16 x 3/8

BRAKE AND CLUTCH ASSEMBLY FOR EARLY FORDS

Part Disc. Price  
CSR020 1928 W/Booster $125.00
 
CSR20 1928-31 Wo/Booster $120.00
 
CSR022 1928-31 W/ Brake & Clutch $245.00
 
CSR 006 1932 W/Booster $125.00
 
CSR007 1932 Wo/Booster $120.00
 
CSR008 1932 W/ Brake & Clutch $245.00
 
KUG 254L 90 degree under dash pedal assembly (Brake only) $235.00
THE FALLOWING IS AVAILABLE TO ORDER BUT NOT COMMONLY IN STOCK.
CSR 1933-34 W/Booster
 
CSR 1933-34 Wo/Booster
 
CSR 1933-34 w/Brake & Clutch
 

 

 

 

RETURN TO HOME PAGE