| WISHBONES & RELATED PARTS: |
 NEW WISHBONES:
| PART NUMBER |
ITEM |
PRICE |
| SPE
91645127 |
STANDARD BONES |
CALL FOR PRICE |
| SPE
91645128 |
DRILLED BONES |
CALL FOR PRICE |
It doesn't get much more traditional than running a set of split wishbones. These are all new with forged front yokes just like Henry built them and fit a 2-1/4" axle boss. They are 40-3/4" from the front perch bolt centerline to the end of the 11/16"-18 threaded rear bung. They also have a 1/2"-20 threaded roid to allow a spring behind perch, shock mount or other hardware to be used. Material thickness is 12 GA (0.1046"). Choose standard or with lightening holes. |
WELD BUNGS
Weld Bungs are for splitting wishbones only - NOT for 4-bar or other suspension uses. Available in 2 diffrent sizes, 3/4ths and 11/16ths.
| Part # |
Disc |
Price |
Add to cart: |
| SPE 910-02969 |
11/16ths Bung |
$11.00ea |
|
| SPE 910-02965 |
3/4ths Bung |
$11.00ea |
|
|
 SPLIT WISHBONE KIT:
This kit includes 2 HD Bungs, 2 Ford HD truck Tie Rod ends. This kit is one of the best for splitting your wishbone. This makes it easy and fast. Remember a Split wishbone opens you up to a ton more suspension options. The tabs below will be required if you do not already have tabs welded onto the frame.
| Part # |
Disc |
Price |
Add to cart: |
| AHR 204-2078-00 |
SPLIT WISHBONE KIT |
$59.98 |
|
 WELD ON TABS:
These tabs are welded to the bottom of your frame allowing a location for your wishbones to mount.
| Part # |
Disc |
Price |
Add to cart: |
| SOC 62152 |
WELD ON TAPERED TABS |
$29.99pr |
|
|
 COMPLETE SPLIT WISHBONE KIT & TH350 CONVERSION FOR 37-41 FORDS
THIS KIT COMES COMPLETE WITH: Upper & Lower Trans Brackets to mount TH350 Trans, HD Wishbone Tie Rods, W/ Weld on tubes, and Mounting Hardware. Weld on tabs show above will be required for a mounting point on the frame for the wishbone ends.
| Part # |
Disc |
Price |
Add to cart: |
| CHA ES-2168 |
COMPLETE SPLIT WISHBONE KIT & TH350 CONVERSION FOR 37-41 FORDS |
$165.00 |
|
| TCI 200-2084-56 |
WELD ON TAPERED TABS |
$22.00pr |
|
|
 HAIRPINS |
  HAIRPIN KITS
Hairpin kits come complete w/ Batwings for use w/ 2 1/4 perch bosses Also includes adjusters, clevises, and weld tabs.
Part No. |
Description |
Price |
|
| P&J 3021 |
VIPER Hairpins Raw
Note: This kit includes steel Batwings |
$350.00 |
|
| MAG 7340 |
Magnum Bullet Hairpin Kit
Note: Raw Steel w/ unpolished S/S Batwings (1928-34 Ford) (A) |
$370.00 |
|
| MAG 7341 |
Magnum Bullet Hairpin Kit
Note: Raw Steel w/ unpolished S/S Batwings Bullet ends style(1928-34 Ford) (B) |
$370.00 |
|
| MAG 7342 |
Magnum Bullet Hairpin Kit
Note: Raw Steel w/ unpolished S/S Batwings FLAT TOP style(1928-34 Ford) (C) |
$379.95 |
|
| MAG-7140S |
Hairpins Polished (HIGH BOY)
Note: Complete kit is polished S/S (1928-34 Ford) |
$585.00 |
|
| SOC-62150 |
So Cal Hairpins Polished
Note: Hairpins are chrome plated with Polished S/S Batwings and Clevises (SOC-62150 Shock mount and weld on tab included) |
$670.00 |
|
|
| 4-BAR RELATED ITEMS: |
4-Bar Kits
4-Bar systems are easy to install and allow for easy alignment while microflex urethane bushings absorb road noise and vibrations.
| Part No. |
Description |
Price |
|
CSR 012 |
Complete kit 1928-31 (STEEL)
|
$340.00 |
CALL TO ORDER |
| CSR 013 |
Complete kit 1932-34 (STEEL) |
$350.00 |
CALL TO ORDER |
|
Kits include 4 Bars made of 304 stainless... Bat Wings, Adjusters, and Washers which are also stainless steel and all come highly polished. All nuts and bolts are chrome plated and urethane bushings and die-stamped steel brackets are included. Your choice of GT or Classic style Bat Wings.
CALL FOR INFO
|
| OTHER RELATED PARTS: |
BATWINGS
REID'S ROD PART'S Batwings are investment cast in 17-4 Stainless steel. Your choice of polished or unpolished. All Batwings to fit 2 1/4 inch Perch Bosses
|
 THE GT STAINLESS BATWING W/ SHOCK MOUNT
These beautiful investment cast "bushing style" S/S Batwings offer some of the nicest styling in the business. Not only good looking, they feature built-in lower shock mounts, come highly polished and ready to install.
| Part No. |
Description |
Price |
ADD TO CART: |
AHR BW001-S |
GT BATWINGS WITH SHOCK MOUNT
|
$285.00 |
|
|
