CATALOG PAGE INDEX:


FOR REAR CHASSIS AND COMPLETE CHASSIS, CLICK THE IMAGE BELOW

FRONT SUSPENTION	YOU ARE HERE!	REAR SUSPENTION

I WANT TO SEE...

THIS INDEX COVERS WHAT IS FEATURED ON THIS PAGE ONLY TO SEE REAR SUSPENTION OR CHASSIS CLICK THE IMAGE BELOW TO GO TO THE RELATED PAGE

CHASSIS PARTS	1932 CHASSIS	1933-1934 CHASSIS
1928-1931 CHASSIS	THE STAGE 4	1935-1940 CHASSIS

CHASSIS PARTS

1932 - Big Block Weld on Motor Mounts.

P&J 3015 - Price..............$ 65.00

1932 - Small Block Chevrolet Weld on Motor Mounts

CSR 011 Price................$60.00

1928-1931- Small Block Chevrolet Weld on Motor Mounts

CSR 019 - Price..................$60.00

UNIVERSAL BOLT-THROUGH ENGINE MOUNT CUSHION KIT

Connects engine mounts to frame adaptors. Heavy duty rubber cushion absorbs vibrations so your mounts won't break. Required on all motor installations. Complete with bolts, washers, and rubber cushions. Does both sides.

CHA SS-0011Q - Price...............$26.00pr

SMALL BLOCK CHEVY MOTOR MOUNT KIT

This kit comes complete with Top, Bottom, and Universal Bolt-Though Engine Mount Cousion Kit

CHA CP-2104 - Price.............$89.00-kit

(CLICK IMAGE FOR MOREI INFO)

1955-1994 SMALL BLOCK CHEVY ENGINE MOUNT

Specially designed engine mounts and frame adaptors allow professional installation of most every engine into the most popular frames. 1955-1994 S/B Chevy engine mount.

SPE 135-6023 - Price...........$59.00ea

Billet Aluminum Motor Mounts

Thise billet aluminum motor mounts are manufactured from 6061 Aluminum and give the Hi-Tech look as well as add clearance for headers and steering. Thise mount come high polish with bushings & 1/2 inner sleeve.

DEU 3225CP-1 - Price...........$185.00

Front Cross Member For 1929-1932

DEU 3250 - Price......$65.00ea

Front Cross Member For 1933-1934

TCI 203-2004-00 - Price......$99.95ea

1928-31 Frame Horns

Although shown here without holes the actual product is drilled with the original holes. Sold in sets

TCI 101-1023-00 - Price.................$57.00pr

1932 Frame Horns

Sold in sets with correct holes already drilled and ready for install.

BRO B-158FRONT - Price...........$89.00pr

42-inch dropped-tube crossmember

W/Tabs for rear ladder bar.

SOC-74001 - Price..................$119.99ea

SO-CAL Model A Rear

Crossmember

REIDS ROD PARTS Model A-style Quick Change Rear Crossmember was developed exclusively for SO-CAL, this Model A transverse leaf spring rear crossmember has beautifully stamped sides welded to a center strip and finished to the highest level of quality. The crossmember, which faithfully follows Model A dimensions, is used in the SO-CAL Step-Boxed™ :32 chassis as well as the new SO-CAL Model A chassis.

SOC-62075 - Price..................$399.98

CALL OR FAX TO ORDER

Coil Over Rear Cross-Member

Shown on the bottom of the shot above.

SOC-62086 - Price.................$107.50ea

MODEL A SPRING CROSS MEMBER

Shown on the top of the image above.

SOC-62085 - Price............$128.00 ea

The SO-CAL Speed Shop is now offering a Stage 4 hiboy roadster package that takes all the tedious foundation work out of your next hot rod project. Contact Reids today to see how to get this project started.

SO-CAL has designed this package to cut a year of time out of any home built project. The package includes:

A rolling step boxed pinched-nose buggy spring frame.

As cast 4’ dropped I-beam axle and polished S/S front end.
Vega cross-steering.
SO-CAL Front Brakes.
9” Currie rear end, complete new drum brakes, buggy sprung suspension with ladder bars.

A factory built steel Brookville body.

The body is fit and shimmed to the frame.
The steel firewall is recessed and filled to fit a Small Block Chevy or Ford.
The doors are hung, fit and gapped as is the deck lid.
Custom made marine plywood front floor boards and the rear floor is modified to clear the 9’ rear end.
The body has been re-enforced with a tubular x-member behind the seat and has a custom made quarter panel turnbuckle system for added strength to the sides of the body.

Other features

SO-CAL Speed Shop windshield.
SO-CAL Hot Rod Wheels including knock-offs, polished and fit with Firestone tires. (Or comparable wheel and tire combo of your choice.)
Brake lines and fuel lines installed.
Custom Glide seat brackets and seat belt mounts.
Dash insert features 6 gauge package, Mullins hot rod alloy column and re-enforced mount and 4 spoke wheel.
Fuel tank.
Grille shell.

Price $ 39,950.00

________________________________________

1928-1931 FORD CAR OR TRUCK CHASSIS

From a bare frame to a complete chassis, REIDS ROD PARTS can provide you with a chassis that will fit your needs. The ´28-´31 Frame is built from 2" x 4" x .125 tubing, making it superior to a stock boxed frame.

_____________________________________________

NEW 1932 FORD So-Cal CHASSIS

All SO-CAL Step-Boxed™ ’32 chassis use American Stamping rails for strength and authenticity. All frames are numbered and tagged for added value and include the following:

The strength of an un ground fillet weld on the boxing plates.

Recessed boxing plates which increase clearance for:

	Brake lines		Exhaust systems
	Fuel lines		Steering components
	Power cables

A “swept C” in the rear which minimizes the stress of the cut and spreads the load over a greater area.

A universal trans mount that cleverly accommodates TH350, TH400, 700R4 transmissions as well as 4- or 5-speed manuals.

Front cross member angled at 7 degrees for correct caster.

All SO-CAL Step-Boxed™ frames include the following:
	Brake proportioning valve mounting pad	All cross members
	Engine and trans mounts	Steering box mount
	Front Pan hard bar bracket	Front brake line tabs
	Master cylinder bracket	Rear radius rod tabs
	Brake pedal mount

NOTE: Due to all the variations between stock and reproduction bodies SO-CAL Step-Boxed™ ’32 chassis come without body mounting holes—we felt it best to leave the hole positioning up to the builder. However, strategically placed under the top rail are welded-in bosses that can be drilled and tapped for body mounting once the position of the body has been finalized in relation to the firewall and the radiator/grille shell.

We strongly advise that you call and speak to one of our crew about your needs and exact specifications. Remember also, the SO-CAL Step-Boxed™ chassis is available with a coil-over or buggy spring quick-change option—call for details and pricing.

NOTE: For those who want something other than a small-block Chevy motor, the SO-CAL Step-Boxed™ chassis is now available without engine or trans mounts. It will also soon be available with small-block Ford and big-block Chevy mounts. Call for more information.

Price Range :

STAGE ONE CHASSIS START AT $3000.00 (IN STOCK - Some options may very)

STAGE TWO AND THREE (ROLLING CHASSIS) AS LOW AS $7000.00

_____________________________________________

1933-34 FORD CAR OR TRUCK CHASSIS

The 1933-´34 frames feature full-length boxed rails with rectangular X-members for strength and rigidity. Available with a 1" dropped stock style front cross member or an IFS front cross member and your choice of one of three different rear cross member

______________________________________

1935-40 FORD CAR OR TRUCK CHASSIS

To accommodate your personal taste and style, REID'S offers a variety of suspension selections. Available with either Mustang II, Custom IFS, or Air Spring Suspension. Offering that Cool Ride and Look that only REIDS ROD PARTS inc. can offer.

FOR OTHER EARLY (FORD OR CHEVROLET )

CHASSIS PLEASE CONTACT US FOR MORE INFO.