@  

 

ORDER FORM

 

 

REIDS ROD PARTS inc ® & related Logo's are registered trademarks of REIDS ROD PARTS Inc.
Copyright © 2008. All Rights Reserved

 

 

 

 

Quiet-Flo™ Electric Fuel Pumps
Manufactured by Essex Industries, one of the most renowned fuel system manufacturers, these state of the art Electric Fuel Pumps offer maximum performance in a compact package. With anodized aluminum housings and high-quality internals, they are both strong and durable. Each pump is factory-tested and includes mounting brackets. The carbon fiber vanes and composite rotors give these pumps the added boost for maximum performance. The high quality construction results in a pump that is 4 to 14 dB quieter than competitors pumps at the same pressure. #1791 is factory preset to 6.5 psi and no regulator is required. With a replaceable screen type inlet filter and the free flow rate of 120 GPH is sufficient to supply 600 hp.

 

Part Disc. Price  
EDE 1791

 

Performance Elec. Fuel Pump

$215.00

 

New to Reids is this Chrome 97 GPH Electric Fuel Pump

The pump is a great edition to any hot rod or classic project.

 

Part Disc. Price  
WYS WP3530C

 

Chrome Elec. Fuel Pump

CALL FOR PRICE

 

Edelbrock Performance Small Block Chevy Fuel Pump

 

Part Disc. Price  
EDE 1721

 

Performance SBC Fuel Pump

$132.00

Edelbrock Performance Big Block Chevy Fuel Pump

 

Part Disc. Price  
EDE 1722

 

Performance BBC Fuel Pump

$132.00

Edelbrock Performance Small Block Ford Fuel Pump

 

Part Disc. Price  
EDE 1725

 

Performance SBF Fuel Pump

$130.00

 

RETURN TO INDEX

15 PSI ENGINE TURNED GAUGE

(LIQUID FILLED)

 

Part Disc. Price  
MOO MPG109LF

 

15 PSI GAUGE

$49.95
MOO MPG110LF

 

BLACK FACE W/ MOON LOGO - 15 PSI GAUGE

$49.95

 

 

Fuel Pump Block Off Plate - BBC & SBF

 

 

 

 

 

 

 

Part Disc. Price  
OBR BOFPM

 

Fuel Pump Block Off Plate

$15.00

 

FUEL PUMP BLOCK OFF PLATE - FLATHEAD

 

Part Disc. Price  
OBT BOFHPE

 

FUEL BLOCK OFF PLATE

$15.00

LARGE EELCO FUEL RAILS:

Due to popular demand we have added a 3 port version of our iconic 6 port fuel rail. Available in cast or show polished finish. (fitting kit sold seperately)

 

Part Disc. Price  
EEL 2681

 

3 Hole Satin

CURRENTLY NOT AVAILABLE
EEL 2682

 

3 Hole Polished

CURRENTLY NOT AVAILABLE

 

 

FUEL PUMP BLOCK OFF PLATE - SBC

 

 

 

 

 

 

 

Part Disc. Price  
OBT BOSB

 

FUEL BLOCK OFF PLATE

$20.00

 

MOON FUEL BLOCKS

 

Part Disc. Price  
MOO MP1010

 

2 Hole

$40.00
MOO MP1011

 

3 Hole

$49.95

CLEAR RED FUEL LINE

(Fitting not included)

 

Part Disc. Price  

SPE 910-11450

SPE 910-11449

 

 

RED 6ft 3/8" id

 

RED 6ft

5/16" id

 

 

$14.95

 

 

$14.95

 

 

Fuel Blocks

 

Part Disc. Price  
GRA 6131

 

3 Hole Triangle

SATIN

$39.99
GRA 6130

 

3 Hole Triangle

POLISHED

$45.00
SOC 90004

 

4 Hole Round

$49.95

 

 

3x2 fuel blockEELCO Fuel Logs

Fuel blocks are made from our original molds! Available in satin and polished finishes. Single fuel inlet and outlets are tapped 1/4 NPT.

 

 

EEL 2653 3 Hole Fuel Log DISCONTINUED
EEL 2651 4 Hole Fuel Log DISCONTINUED

 

EDE 1280 2 Hole Fuel Log $46.00
EDE 1285 3 Hole Fuel Log $52.00
EDE 1290 4 Hole Fuel Log $52.00

 

 

SPINNER TOP

 

Part Disc. Price  
MOO MP608
SPINNER CAP - TOP POL $77.00ea
MOO MP607V SPINNER CAP -POL VENTED $79.00ea

 

RETURN TO INDEX

MOON SPREADER BAR BRACKETS

Polished Aluminum. Allows installation of Moon 500 series tanks. SOLD IN PAIRS No Drilling necessary.

LIM LWMB  - Price..............$170.00pr

(SPECIAL ORDER ITEMS MAY TAKE EXTRA TIME FOR DELIVERY )

Inline Fuel Filter w/Glass

 

Part Disc. Price  
SPC 9272

 

Fuel Filter 3/8 Inlet / Oulet

$6.50
SPC 9271

Fuel Filter

5/16 Inlet / Outlet

$6.50

 

 

Finned Fuel filter.

 

Part Disc. Price  
OBT EFFCA

 

Fuel Filter - Various Inlet / Outlet Adapters Supplied

$25.95

 

ORDER FORM

 

1932 STOCK REPRODUCTION GAS TANK

Faithful reproductions of the original with stock dimensions and stock 12-gallon capacity. They come with pickup tube, threaded sender boss, vent and twist on filler neck (screw-on filler adapter kit now available.)

VIN B-9002-WS - Price...................$395.00

ADDITIONAL SHIPPING COST WILL APPLY

RETURN TO INDEX

1932 DEEP GAS TANK

Faithful reproductions of the original with stock dimensions and 16-gallon capacity. This tank addes the extra gallens by sitting a little deeper They come with pickup tube, threaded sender boss, vent and twist on filler neck (screw-on filler adapter kit now available.)

VIN B-9002-WD - Price...................$425.00

ADDITIONAL SHIPPING COST WILL APPLY

1933-34 GAS TANK

Faithful reproductions of the original with stock dimensions and 12-gallon capacity. Our steel fuel tanks accept aftermarket sending units and are an easy bolt-in installation.

VIN 40-9002 - Price...................$225.00

ADDITIONAL SHIPPING COST WILL APPLY

1920-26 FORD GAS TANK

With a very historic look these tanks are great for most early roadsters and pickups. These tanks have a 10-gallon capacity. The tanks comes with polished brass vented cap, ground straps and due to its design they are easy to install a sender (not included) This product may also need to be special ordered as we only keep one in stock at a time. This may cause a delay of around 1-2 weeks for delivery, but if we have it in stock it commonly ships same day.

Contact first to make sure we have this item in stock.

ROO GT2026BKTS - PLEASE CALL

ADDITIONAL SHIPPING COST WILL APPLY

RETURN TO INDEX

SPUN FUEL TANKS

These Spun-Aluminum gas tanks have a light brushed finish, are all hand Tig welded and come with a 1 piece fill neck for better gas cap sealing. The larger diameter outlet bung have a 1/4" NPT hole but can be tapped out for larger outlet  holes. You can also order them with a return bung for Fuel Injection cars and buggy. All aluminum tanks come with vented gas cap and 2 black brackets. (Gallon measurement is an approximation only).

SPUN:

 

PART DISC. PRICE  
OGA C81625 8X16 SPUN TANK / CENTER FILL DISCONTINUED
OGA C103025 10X30 SPUN TANK / CENTER FILL DISCONTINUED
OGA 00123 8X30 SPUN TANK / CENTER FILL DISCONTINUED
OGA C103325 10X33 SPUN TANK /CENTER FILL DISCONTINUED
OGA E103325 10X33 SPUN TANK / END FILL (SHOWN) DISCONTINUED

 

POLISHED:

 

PART DISC. PRICE  
OGA C81625P

8X16 SPUN TANK / CENTER FILL (FULL POLISHED)

DISCONTINUED

MOON EYES 500 SERIES FUEL TANKS

Constructed of the finest grade aluminum with the MOON "SUN RAY" finish. All 500 series tanks are .080"thick, 8-1/2"diameter, Heli-Arc welded. Standard fuel caps are billet aluminum with knurled grip. "o"ring seal with brass vent, all associations approved, Two 3/8" N.P.T return and one 3/4" outlet are standard on all 500 series tanks. Bung options available , 1/8" ,1/4" ,3/8" ,1/2" ,3/4" ,or 1" size. Specify N.P.T. standard pipe or AN type thread. You may also send a sketch of your own design for a quote by fax or mail. Please specify your specific tank needs when ordering. Extra charge applies on all special orders. No returns. MP500 (2Gallon Tank 8.5 Dia x 10" Long), MP501 (3.5Gallon Tank 8.5 Dia x 15" Long), MP502 (5Gallon Tank8.5 Dia x 20" Long)

***PLEASE NOTE***
Tanks may take up to 3-5 weeks for delivery, as Moon is know for back orders.
Brackets Are Sold Separately.

 

PART DISC. PRICE  
MOO MP500 MOON TANK - 2 GAL $280.00
MOO MP501 MOON TANK - 3 1/2 GALLON $299.00
MOO MP515-8 FUEL TANK BRACKETS $80.00
 
OTHER MOON 500 SERIES TANKS ARE SPECIAL ORDER.
FOR OTHER TANK ACCESSORIES CLICK HERE

WHAT DOES THIS MEAN?

ADDITIONAL SHIPPING COST WILL APPLY

THESE ITEMS MAY REQUIRE POSTAGE IN ADDITION TO THE AMOUNT CHARGED ON THE SITE DURING CHECK OUT.

 

 

RETURN TO INDEX